AN Hardware & Hose
-10AN 10FT PRE-CUT COIL BRAIDED HOSE
PTFE-lined stainless braided hose in -4AN to -16AN, sold by the foot. Fuel, oil, coolant, and brake compatible.
SKU: BH-10-10FT
✓ Free shipping on orders over $150
✓ Same-day dispatch on orders before 2 PM EST
✓ 30-day returns for unused items
✓ Pickup available in Miami, FL 33172 — by appointment
Technical Specifications
| Liner | PTFE — fully inert |
|---|---|
| Braid | 304 Stainless steel |
| Temp Rating | -73°C to +204°C continuous |
| Pressure Rating | See chart by AN size |
| Compatibility | Gasoline, E85, methanol, diesel, oil, coolant, brake fluid |
| Sizes | -4AN through -16AN |
Frequently Asked Questions
Is PTFE braided hose compatible with E85?
Yes. PTFE (polytetrafluoroethylene) is chemically inert and fully compatible with all fuel types including E85, methanol, and water-methanol injection. It is also compatible with brake fluid, transmission fluid, and engine oil. Do not use PTFE hose for oxygen or strong oxidising agents.
How do I cut braided hose without fraying?
Wrap the cutting point tightly with two layers of masking tape. Cut through the tape and hose with a sharp angle grinder cutoff wheel in a single pass, or use dedicated hose cutting scissors. The tape holds the braid wires in place during the cut. Remove the tape after cutting and blow out the hose before assembly.
How much hose do I need for a full turbo oil feed/return?
A typical single-turbo installation uses 18–24 inches for the oil feed line and 24–36 inches for the return line. Buy in 3-foot increments to have enough to remake a fitting if needed. Our 10-foot coils are the most economical option for full system builds.