Turbo Accessories
T4/T6 COMBO INCONEL 625 TURBO INLET FLANGE 1/2″ HEAVY DUTY
KEY FACT
The T4/T6 Combo Turbo Inlet Flange is a 1/2″ (12.7 mm) Inconel 625 precision-machined component designed for both T4 and T6 footprint turbos using a single dual-pattern flange. CNC laser-cut to ±0.003-inch flatness, AMS 5666 certified, and priced at $168.36 — in stock with same-day dispatch.
SKU: TIFT4T6INCONELHEAVYDUTY
It accepts both T4 and T6 bolt patterns in a single piece (8 × M10/M12), eliminating the need to source two separate flanges across a mixed-platform build. Manufactured from AMS 5666 Inconel 625, it withstands continuous temperatures to 1093°C (2000°F) — the mandatory alloy for extreme-boost, compound, and sequential turbo applications. The 1/2-inch heavy-duty thickness is recommended for diesel engines, large-displacement builds, and any setup with a rigid unsupported downpipe. Every flange is CNC laser-cut and surface-ground to ±0.003-inch flatness with bolt holes reamed to H7 tolerance, providing a gas-tight metal-to-metal seal without a gasket on properly prepared turbos.
✓ Free shipping on orders over $150
✓ Same-day dispatch on orders before 2 PM EST
✓ 30-day returns for unused items
✓ Pickup available in Miami, FL 33172 — by appointment
Technical Specifications
| Inlet Port Size | 3.32–4.09 in |
|---|---|
| Flange O.D. | 5.45 × 4.55 in |
| Bolt Pattern | 8 × M10/M12 |
| Thickness | 1/2″ (12.7 mm) |
| Max Temperature | 982°C / 1800°F |
| Material | Inconel 625 |
| Standard | AMS 5666 |
| Surface Finish | Precision ground |
| Flatness | ±0.003 in |
| Bore Tolerance | H7 reamed |
Material Comparison Guide
304 Stainless vs 316 Stainless vs Carbon Steel vs Inconel 625 — your selection is highlighted
| Specification | 304 Stainless | 316 Stainless | Carbon Steel | Inconel 625 YOUR SELECTION |
|---|---|---|---|---|
| Max Continuous Temp | 871°C (1600°F) | 925°C (1700°F) | 425°C (800°F) | 1093°C (2000°F) |
| Corrosion Resistance | Good | Excellent | Poor (needs coating) | Excellent |
| Weldability | Excellent | Excellent | Excellent | Good |
| Cost (relative) | $$ | $$$ | $ | $$$$ |
| Best For | Street / track | Marine / E85 / diesel | Budget builds / coated manifolds | Extreme boost / compound turbos |
| Standard | ASTM A240 304 | ASTM A240 316 | ASTM A36 | AMS 5666 |
| Recommended Gasket | Optional | Optional | Recommended | Optional |
Frequently Asked Questions
About the T4/T6 Combo Inconel 625 Turbo Inlet Flange 1/2″ Heavy Duty
Does this flange fit my turbo?
Yes — the T4/T6 combo flange supports both T4-footprint (Garrett T04E, Precision 6262) and T6-footprint (Precision 88mm+, BW S475) turbos using its dual bolt pattern. It is not compatible with T3 or V-Band turbos.
Why should I choose Inconel 625 for a turbo inlet flange?
Inconel 625 is the correct choice when sustained exhaust gas temperatures exceed what stainless can handle — typically builds making over 800 wheel horsepower, compound turbo systems, drag race engines, or any application with extended wide-open-throttle operation.
Should I choose the 3/8-inch or 1/2-inch thickness?
The 1/2-inch (12.7 mm) heavy-duty thickness is correct for diesel engines, large-displacement V8 builds, and any application where the downpipe is rigid and places bending stress on the flange. For lighter gasoline builds, the standard 3/8-inch option saves weight and cost.
How do I install the T4/T6 Combo turbo inlet flange?
Clean the turbo inlet face and remove all old gasket material. Align the flange with the 8 bolt holes and thread the M10/M12 bolts in finger-tight. Torque in a cross pattern to spec (M8: 18–25 Nm · M10: 30–40 Nm · M12: 50–65 Nm). A 1/16-inch Cometic MLS gasket is recommended on builds over 25 PSI.
Does this flange need a gasket?
A gasket is not strictly required — the face is ground to Ra 1.6 μm, which creates a metal-to-metal seal on most turbos. However, a 1/16-inch multi-layer steel (MLS) gasket is recommended for builds over 25 PSI boost or on turbos with minor surface irregularities.
What is the price of the T4/T6 Combo Inconel 625 Turbo Inlet Flange 1/2″ Heavy Duty?
The T4/T6 Combo Inconel 625 Turbo Inlet Flange 1/2″ Heavy Duty is $168.36 per piece with free shipping on orders over $150. It is in stock and ships same day when ordered before 2 PM EST.